Home » Technical Data
Product Info
About Our Products
General Applications
Applications Chart
Technical Data
MSDS Sheets
Tech Bulletins
Test Reports
Reference Articles
Installation Guide
Save Fuel, Save the Planet
Case Study

Company Info
Contact Us
About Us
Shipping & Returns
Privacy Notice
Conditions of Use
Tested in
accordance with

Chemistry So Unique, It's Patented™

Boron CLS Bond

Boron CLS Bond® is based on the intricate crystal lattice structure (CLS) of the hydrated boron molecules. That lattice structure allows the layers of hydrated boron particles to slide virtually friction-free over each other, like the playing cards in a fresh deck, while retaining awesome strength. The ultrafine sub-micron particles of hydrated boron reach every metal surface and crevice, lubricating with superior slipperiness as they chemically bond with the host material.

A Breakthrough That's Redefining the Standards For:

  • Reducing Friction and Heat
  • Reducing Wear and Failure
  • Reducing Corrosion
  • Reducing Maintenance
For a more detailed explanation of the problem, and how Boron CLS Bond® provides the solution, read the White Paper: "The Evolution and Benefits of a High-Performance Biodegradable Lubricant." (PDF)

For other articles on the Boron CLS Bond® Technology, go to our Reference Articles Page.

How Does Our Patented Boron CLS Bond® Technology Work?

  • Boric acid is introduced to a metallic substrate in the presence of water vapor.  Interaction between the substrate, the water (H2O), and Boric Acid (H3BO3) forms a continuously self-replenishing film of boric oxide (B2O3) that bonds to the substrate, forming a corrosion-resistant barrier.
  • The boric oxide spontaneously reacts with the air, replenishing the boric acid.  The boric acid molecules form into crystal platelets, each of which is a triclinic lattice of molecules strongly bound together by macromolecular covalent bonds (see microscopic photo above).
  • Aligned by the mechanical motion of the substrate, the platelets form stacked layers with very small (0.318 nm) spaces between.  As a result, the inter-platelet layers are bound by weak "van der Waals" forces, allowing a very low coefficient of friction.

Unique Molecular Structure Makes the CLS Bond Unrivaled

The benefits of CLS Bond® products have been documented in test after test. For example, engine friction is reduced by up to 80%, and engine wear by up to 90%.* And in private testing by industrial users, for both engine oils and industrial grease, the results have been even more impressive. Plus, boron is environmentally friendly in all forms. The bottom line is that lubricants with Boron CLS Bond® can be used anywhere there's a need for guaranteed performance.

*Testing performed by Argonne National Laboratory, BNM Research, Falex, Inc., Herguth Laboratories, Inc., Micromy AB and others.
All referenced company or product names may be trademarks or registered trademarks of their respective owners.
Copyright © 2019
31368 Via Colinas, Suite 104, West Lake Village, CA 91362 USA
3000 SW 42nd Avenue, Palm City, FL 34990 USA